[FrankJScott]

[center][/center]

[center]VIEW BEST SEX DOLL FEET ADVICE HERE[/center]

Standing Feet Vs Non-Standing Feet Explained: Which Should You Choose
Standing feet go unconsidered until they're needed, at which point purchasers discover the difference is immense. Small on the spec sheet, it still changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. Grasp the difference before ordering and you'll have evaded a frustrating purchase in one of the simplest ways possible.

Standing Upright Without Support
Simple is the basic difference. With standing feet, metal bolts are embedded in the soles, letting the doll stand upright without support. Because non-standing feet don't have these bolts, the doll can only sit or lie down; attempting to stand her damages the feet. The key is the bolts, and everything else follows from whether they're there.

Why Photographers Specify Standing Feet
Standing feet are necessary for photography and display. With a doll that can stand unaided you get full-length poses without evident supports and display in a corner, a doorway, or anywhere else that requires her to be upright. The chief reason most photographers specify standing feet when ordering is the wide range of poses and settings it opens up that non-standing feet rule out.

Why Showers Demand Standing Feet
For shower use too, standing feet are necessary. If you want to shower with your doll, she needs to be able to stand, because lying her down in a shower is both impractical and hazardous. Her stability in a wet environment is down to the standing feet, and the metal bolts keep the feet from absorbing water the way non-standing feet would. Water absorption in non-standing feet can lead to rust and eventual structural failure, so this is a genuine safety consideration.

Why Shower Use Destroys So Many Dolls
A lot of damaged dolls come from shower use, so the point is worth expanding. Non-standing feet include foam or filler material inside the ankle, and wet conditions make that material absorb water. Rust follows as the water attacks the metal skeleton inside the leg; it takes weeks or months to become noticeable, but it's essentially unfixable once it starts. A doll with non-standing feet shouldn't ever be in the shower: the water will find its way in regardless of your precautions, no matter how attentive you are.

Display Rather Than Hide
Storage is easier with standing feet in some setups. Without needing a hanging hook or a storage case, a doll with standing feet can be stored upright in a corner, a wardrobe or a storage cabinet. This is a space-efficient option for purchasers who don't have room for a hanging setup, and it's a decent alternative for customers who want to display the doll rather than keep her hidden. Some customers prefer the apparent, accessible storage that the standing feet make possible.

A Few Percent More Expensive
On the downside, standing feet are somewhat more pricey and slightly heavier. You'll usually pay a few percent more than for non-standing feet, because the metal bolts add a small amount of weight and manufacturing is more involved. If you're purchasing on a very tight budget, know that the difference is small and it's usually worth the additional cost.

Not a Reason to Avoid Standing Feet
Another downside is that the bolts can become visible if the feet are bare. With high-heeled shoes or open-toed footwear, the bolts might be apparent in photos, something some buyers find distracting. Cover the feet with closed shoes or choose footwear that conceals the bolts and this slight aesthetic issue is solved, so it's not a reason to steer clear of standing feet entirely.

The Case for Non-Standing Feet
For purchasers who only want to use the doll in bed, with no plans to display her standing or shower with her, non-standing feet are cheaper, lighter and fine. A doll that lives largely in a bed or on a sofa gets by perfectly well on non-standing feet, with the savings available for upgrades like articulated hands or a better wig. This is a completely valid choice for purchasers who know what they want.

Softness as a Selling Point
Some buyers find non-standing feet more comfortable to touch, being a little softer and more elastic. This is a subtle difference, and it's not typically enough to justify the choice on its own, but it's worth knowing about if you're specifically looking for maximum softness. The feet on non-standing dolls feel more like the rest of the doll and less like they have a hard core inside them.

Foam in the Ankle Can't Take the Weight
Forgetting what kind of feet they have, purchasers attempt to stand the doll in any case, and that's the sizable risk with non-standing feet. The foam inside the ankle will tear or collapse under the doll's weight, since it can't support it, so this typical slip-up causes real damage. The feet have been permanently damaged, so the doll can no longer stand even if you try to support her. Resist the temptation to test the limits of non-standing feet, and remember that they're non-standing, if you're buying them.

The Short Answer Is No
Another question is whether standing feet can be retrofitted to a doll that doesn't have them. Short answer: no, not readily. New hardware has to be installed by cutting into the feet if you add the bolts afterwards, and it's expensive and often doesn't work as well as the original, since the bolts are embedded in the soles during manufacturing. Attempting to add standing feet later is worse than buying a doll with standing feet in the first place, so if you're considering a doll without them and might want them later, purchase them first.

Choosing Between Standing and Non-Standing Feet
The functional advice on picking between standing and non-standing feet is uncomplicated. Standing feet are a must if you plan to photograph the doll, display her standing, or use her in the shower. When you only want to use her in bed or on a sofa, and display doesn't matter to you, non-standing feet are perfectly adequate. For the doubtful, standing feet are the safer choice; they leave you free to do whatever you like with the doll and are worth the small additional cost.

Lying Down Storage Needs More Space
We should mention a gender consideration as well. Normally, standing feet benefit male dolls more than female dolls, because male dolls are heavier and more tricky to store in any other way. Lying down storage is a must for a 45kg male doll that can't stand, and it puts pressure on the body and requires more space. A real upside for customers who don't have a lot of room is that standing feet give male dolls the ability to store upright.

Softer, More Natural Non-Standing Feet
Worth a final note is the aesthetic difference between standing and non-standing feet. When the doll is barefoot, the small hardness at the bottom of standing feet, caused by the bolts, can be noticeable. Some buyers consider it less aesthetically pleasing, particularly with fragile features, because of the a little industrial look of the hard soles. The softer and more natural look of non-standing feet is what some customers prefer. It's worth factoring into your decision if barefoot photos are a priority, as this trade-off only matters if you're photographing the doll barefoot.

Bolt Care for Standing Feet
There's a maintenance angle as well that's worth considering. Keep an eye on the bolts in standing feet, since a loose bolt can damage the foot or the ankle while a bolt that falls out totally can make the doll collapse. Check the bolts every few months by gently twisting them, and if they feel loose, tighten them with the suitable tool. Because non-standing feet have no hardware to come loose, they don't have this issue, and they're a little lower-maintenance in the long run.

Grip and Stability
The bolts affect how the doll stands on different surfaces as well. On carpet, the doll is constant, the bolts gripping well. On silky hard flooring in particular, the bolts can slip, and the doll may need extra support to stay upright. On a hard surface, consider using a small mat or a grippy pad under the feet to prevent sliding. This is worth knowing about if you plan to display a doll with standing feet on a hard floor. Non-standing feet don't have the issue, because the doll isn't standing in the first place.

Non-Standing Feet Are Slightly Shorter
A final, often overlooked, consideration is the effect of standing feet on the doll's overall proportions. A little changing the way the doll looks in barefoot photos is a possible effect of the small amount of length the bolts add to the foot. This subtle effect, typically invisible in shoes, matters if you're planning to photograph the doll barefoot and you care about specific proportions. The feet are slightly shorter and more natural-looking on non-standing feet, which don't have this effect because they don't have the bolts.

Who Should Skip Standing Feet
The bottom line is that standing feet are worth the additional cost for most buyers, because they open up posing, display, storage, and shower choices that non-standing feet don't. Who can skip them? Buyers who are certain the doll will only be used in bed and won't be displayed or photographed standing. Anyone else should go for standing feet, the better choice and one of the simplest upgrades to justify. More info at this rosslink. Also check out see page on top of going here as well as index not to mention her response which is worth considering with click this alongside all site here alongside all more helpful hints and don't forget my site on top of company website and read full article for more.
[center][/center]

[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]